Other products by AQUA POWER LTD.
Item #: 9062-PR
Our Price: USD $738.00
Quantity:
 

Description 




Transom Mount Silencer 9062-PR was first offered in 2002. The primary feature is its ability to quiet harsh noises produced by high horsepower marine engines. The most exciting feature is that no rpm is lost at the top end in most installations.

APL offers a transom mount specifically designed for the difficult Mercury HP 500 engine. This model, 9062-PR, has an outside diameter (case) of only 5" and extends 7.5" behind the transom. It features an internal flap and accepts an external rubber flap for added surge protection. Installation is the same as our 9060-PR model. (Also available in clamp-ons.)

4" inlet, Flap, 6" OD Flange, 5" OD Case, 7.5" Aft of Transom, Helical Vanes

APL also offers a transom mount based on our In-tube silencer designed for engines up to 500 horsepower. This unit is offered as a stub, straight or angled tip. The stub tip extends only 1.5" behind the transom, the staight and angled tips extend 6". The outside diameter is 4". An internal flap is featured on the straight tip model. Both stub and straight tip models accept an external rubber flap for surge protection. Installation: remove the existing tip and replace it with the new unit using sealant and three screws.

Note: 9062-PR is specifically designed for HP500 engines and is not normally used for other applications. 9062-PR cannot be used with cast iron exhaust manifolds.



Share







Pin It

Email A Friend

Send your friend a link to this product.