• CIO Comp Cams Elite Race Solid Roller Lifters

click on thumbnail to zoom
Other products by CIO
Item #: CMP98819-16
Our Price: USD $937.50
Quantity:
 

Description 




Quick Overview

Description: Elite Race Roller Lifters
Dia: .842"
Set Includes: (8) 98852C-2
Pushrod Seat Location: 8 Pairs Centered
Wheel Diameter: .750"

Comp Cams' "Elite" mechanical roller lifters feature an exclusive design that does not include an oil band. This maximizes rigidity and leads to reduced lifter bushing wear. "Elite" lifters are not only strong but each lifter weighs less than 100 grams. They are made from an SAE 8620 steel alloy that is CNC machined and then REM-finished. The steel alloy wheels are precision ground and ride on micro contoured needles made from 52100 bearing steel.

The over sized axles are dual-pinned. This leaves a small gap so that pressure fed oil can now flow through the center and top of the axle getting directly to the needles. The captured link bar and modular design enables the pushrod insert to be swapped out for centered, left, or right offsets.

In today's high horsepower race engines, solid lifters face grueling punishment at every turn. To survive even the most demanding conditions, "Elite" mechanical lifters from Comp Cams have been designed from the beginning to be the ultimate valve lifter.

Set of 16
All lifter bodies are "tall" and will clear both stock and aftermarket .300" tall lifter bores and will properly fit either 5/16" or 3/8" ball pushrods.



Share







Pin It

Email A Friend

Send your friend a link to this product.